Vertiv Avocent ACS800 Technical Note

Advanced console system; usb recovery technical note

Hide thumbs Also See for Avocent ACS800:

Avocent® ACS800/8000

Advanced Console System

USB Recovery Technical Note

Table of Contents

Need help?

Do you have a question about the Avocent ACS800 and is the answer not in the manual?

Page 1 Avocent® ACS800/8000 Advanced Console System USB Recovery Technical Note...
Page 2 If you encounter any installation or operational issues with your product, check the pertinent section of this manual to see if the issue can be resolved by following outlined procedures. For additional assistance, visit https://www.VertivCo.com/en-us/support/. Vertiv | ACS800/8000 System USB Recovery Tech Bulletin | 7.13.17...
Page 3 U-Boot > run usbboot 5. The Avocent® ACS800/8000 advanced console system then boots to a bash prompt. 6. Proceed to the next section to recover the flash operations from this prompt. Vertiv | ACS800/8000 System USB Recovery Tech Bulletin | 7.13.17...
Page 4 3. A reboot should automatically occur. If this procedure completes successfully, the WebUI is now accessible and a normal firmware upgrade can be performed to move the system to the desired firmware version. Vertiv | ACS800/8000 System USB Recovery Tech Bulletin | 7.13.17...
Page 5 This page intentionally left blank. Vertiv | ACS800/8000 System USB Recovery Tech Bulletin | 7.13.17...
Page 6 VertivCo.com | Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA © 2017 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners.

Avocent acs8000