Disc; Playing A Disc - Sony DAV-DZ270 Operating Instructions Manual

Disc

Playing a Disc

Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
"/1
A
Disc tray
STEP
/ ,
/
/m/
M/
X
1
Turn on your TV.
2
Switch the input selector on the TV to
this system.
3
Press "/1.
The system turns on.
Unless the system is set to "DVD," press
FUNCTION +/– to select "DVD."
4
Press A.
5
Load a disc.
Adjust the volume
H
FUNCTION
Connect
headphones
"/1
FUNCTION
+/–
MUTING
VOLUME +/–
./>
H
x
Place one disc on the tray, and then press A.
Note
• When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
not skewed on the inner circle of the tray.
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than one disc on the tray.
6
Press H.
The system starts playback (continuous
play).
7
Adjust the volume by using VOLUME +/
– on the remote or the VOLUME control
on the unit.
The volume level appears on the TV screen
and in the front panel display.
Note
• Depending on the system status, the volume level
may not appear on the TV screen.
• When you set the Control for HDMI function to on,
the TV that is connected to the system with an HDMI
cable (not supplied) can be sync-operated with the
system. For details, see "Using the Control for HDMI
Function for "BRAVIA" Sync" (page 64).
Tip
• When you connect the system and TV with an HDMI
cable (not supplied), you can operate them simply,
using the Control for HDMI function. For details, see
"Using the Control for HDMI Function for
"BRAVIA" Sync" (page 64).
To turn the system off
Press "/1 while the system is on. The system
enters standby mode.
To save power in standby mode
Press "/1 while the system is on.
To enter power saving mode, make sure that the
system is in the following status.
– "DEMO" is set to "OFF" (page 26).
35
GB