Listening From An Audio Component; Using An Audio Cord; Using An Optical Digital Cord - Sony Walkman D-VE7000S Operating Instructions Manual

Listening from an
Audio Component
By connecting an audio component having
built-in Dolby Digital decoder or DTS
decoder using an optical digital cord, you
can enjoy the disc recorded in Dolby Digital
or DTS sound with surround effects. Set the
[AUDIO SETUP] items according to the
audio component connected (  page 43).
Refer to the operating manual supplied with
the component connected.

Using an audio cord

1
Connect an audio component.
to AUDIO
LINE SELECT
Audio cord
(mini jack, not supplied)
2
Set the LINE SELECT switch to OUT.

Tip
When the audio component supports Dolby
Surround (Pro Logic), select [Dolby Surround] in
[DOWNMIX] under [AUDIO SETUP]. Otherwise,
select [NORMAL] (  page 43).
48
D-VE7000S.US.2-683-363-11(1)
1
2

• When the audio component supports Dolby
• When connecting an amplifi er having a built-in
Stereo component
• When connecting an amplifi er having a built-in
Using an optical digital
cord
Connect a digital audio component.
to AUDIO
LINE SELECT
Optical digital cord
(not supplied)
Digital audio
component
to optical digital
input
Set the LINE SELECT switch to OUT.
Tips
Surround (Pro Logic), select [Dolby Surround] in
[DOWNMIX] under [AUDIO SETUP]. Otherwise,
select [NORMAL] (  page 43).
Dolby Digital decoder, select [Dolby Digital] in
[Dolby Digital] in [DIGITAL OUT SETUP] under
[AUDIO SETUP] (  page 43).
DTS decoder, select [DTS] in [DTS] in [DIGITAL
OUT SETUP] under [AUDIO SETUP] (  page
43).
Viewi
Playe
Comp
You can inp
component
need a plug
jack. Refer
with the co
1
Conne
Plug ada
not supp
to VID
2
Set the
D-VE7000