Changing The Settings Of The Auto Power On/Off Function - Sony S-Frame 4-155-760-11 (1) Operating Instructions Manual

Changing the settings of
the auto power on/off
function
You can use the timer function to turn the
photo frame on or off automatically when the
photo frame is turned on.
1
Press MENU.
The menu is displayed.
2
Press B/b to select the
(Settings) tab.
The settings screen is displayed.
3
Press v/V to select [Auto power ON/
OFF] and press
The screen used for setting a value for
[Auto power ON/OFF] is displayed.
When using DPF-A72N/E72N, you can
set the auto power function on [Simple]
mode only, so skip to step 5.
4
Press v/V to select [Setup method],
and press
select [Simple] or [Advanced], and
press . (DPF-D72N only)
[Simple]: Sets the auto power ON/OFF
function finely in one minute increments.
[Advanced]: Sets the auto power ON/OFF
function according to a day of the week by
one hour units.
GB
42
.
. Then press v/V to
5
Set the time setting.
[Simple]
Press v/V to select [Auto power ON/
1
OFF] and then press
Press v/V to select [Enable] and then
2
press .
Set the auto on/off timer.
3
Press v/V to set the time you want.
AM or PM is displayed on the right of
the screen when you select [12 hours]
on the time display setting.
Set the auto ON/OFF day.
4
Press v/V to select the day you want to
use this function and then press
check. Press v/V to select [OK] and
then press
[Advanced] (DPF-D72N only)
Press B/b/v/V to select the time you
1
want to use the auto power on/off
function.
You can set this function according to a
day of the week by one hour units.
The color of the selected time zone
changes to blue after you press
power supply of the photo frame will be
turned on when the blue time zone time
occurs. The color of the selected time
.
.
. The
to