Operations In An Initial State - Sony S-Frame 4-185-902-13 (1) Operating Instructions Manual

Removing the AC plug from the wall outlet
If the AC plug remains inserted in the wall outlet, remove it as
follows, without using a tool:
Metal terminals at the rear of the AC plug.

Operations in an initial state

When the photo frame is turned on, the initial display appears.
• If handled roughly, the AC plug
may become detached from the AC
adaptor main unit and remain in the
wall outlet. If this occurs, grasp the
AC plug with dry hands as
illustrated and remove it from the
wall outlet. Do not use a tool. Be
careful not to touch the metal
terminals at the rear of the AC plug.
• Check to see if there is no trouble
with the AC adaptor main unit and
AC plug, and then slide the AC
plug into the AC adaptor main unit
until it clicks into place.
• If there is any problem with the
AC adaptor main unit or AC plug,
consult with your Sony service
facilities for repair.
zTips
x If the photo frame is not
operated
If the photo frame is not operated for
10 seconds, the demo mode is
displayed.
x Releasing the
demonstration mode
If any other button than the power
button is pressed, the screen returns
to the initial display.
GB
13