Turning On/Off Your Camera; How To Use The Control Button - Sony CD Mavica MVC-CD350 Operating Instructions Manual

Turning on/off your camera

POWER
POWER button
POWER lamp
, Press POWER.
The POWER lamp (green) lights up and the
power is on. When you turn on your camera
for the first time, the Clock Set screen
appears (page 16).
Turning off the power
Press POWER again. The POWER lamp
goes out, and the camera turns off.
Auto power-off function
If you do not operate the camera for about
three minutes during shooting or viewing or
when performing SET UP, the camera turns
off automatically to prevent wearing down
the battery. The auto power-off function
only operates when the camera is operating
using a battery pack. The auto power-off
function also will not operate in the
following circumstances.
• When viewing movies
• When a connector is plugged into the
(USB) jack or the A/V OUT (MONO)
jack.
How to use the
control button
0EV
EV
WB
To change the current settings of the
camera, bring up the menu or the SET UP
screen (page 40), and use the control button
to make the changes.
For each item, press v/V/b/B to select the
desired value, then press the center z or
v/V/b/B to make the setting.
0EV
WB ISO
400
200
100
Auto
ISO
15