Removing The Covers; Removing Parts Of The Insulation - Nibe F750 Installer Manual

Removing the covers

FRONT COVER
1
2
L E K
Remove the upper panel by pulling it straight out.
1.
2. Remove the screws from the lower edge of the
front panel.
3. Lift the panel out at the bottom edge and up.
Pull the panel towards yourself.
4.
SIDE COVERS
The side covers can be removed to facilitate the install-
ation.
1. Remove the screws from the upper and lower
edges.
2. Twist the cover slightly outward.
3. Move the hatch backwards and slightly to the side.
Pull the cover to one side.
4.
Pull the hatch forwards.
5.
NIBE F750
Removing parts of the
insulation
Parts of the insulation can be removed to facilitate the
installation.
INSULATION, TOP
3
1.
4
L E K
2.
Disconnect the cable from the motor and remove
the motor from the shuttle valve as illustrated.
A
B
Grip the handle and pull straight out as illustrated.
Chapter 2 | Delivery and handling 9