Subscribe to Our Youtube Channel
Related Manuals for Roger UT-2USB
Summary of Contents for Roger UT-2USB
-
Page 1: Operating Manual
Roger Access Control System Communication interface UT-2USB v2.0 Operating Manual Hardware version: 2.0 Firmware version: 2.0.2 Document version: Rev. B... - Page 2 1. D ESCRIPTION AND SPECIFICATION UT-2USB v2.0 interface enables communication with RS485 devices by means of computer’s USB port. Basically, the interface is dedicated to RACS system but it is installed as virtual serial COM port so it can also be applied in communication with third party devices. If the interface is to be used beyond RACS system then there should be performed tests in order to confirm its suitability in particular scenario of operation.
-
Page 3: Driver Installation
Fig.1 Connection UT-USB to RACS system 2.2 Driver installation Please install UT-2USB driver (available for download at www.roger.pl) prior to the first connection of device to the computer. The driver is compatible with Windows XP and newer (x86 and x64 versions). - Page 4 Weight of the equipment is specified in the document. Contact: ROGER sp. z o.o. sp. k. 82-400 Sztum Gościszewo 59 Tel.: +48 55 272 0132 Fax: +48 55 272 0133 Tech.
Need help?
Do you have a question about the UT-2USB and is the answer not in the manual?
Questions and answers