auna Kara Liquida BT Manual page 20

NOTE:
• Place the devices to be paired within 1 meter (3 feet) of each other when pairing.
• Some source devices are unable to display lists of detected devices. To pair this unit with the source
device, refer to the source device operating manual for details.
5. Select "Kara BT" from the source list. If Passcode* is required, enter "0000". * Passcode may be
called PIN Code, Passkey, PIN number or Password.
6. Pairing indicator will stop blinking once the unit is successfully paired with the source device. (Pair-
ing information is now stored in the unit.) Some audio source devices may connect with the unit
automatically after pairing is completed. For others, follow the instructions in the source device
operating manual to start the connection.
7. Press the play button on main unit source device to start BT connection.
Listening to sound output
Check that:
• The mode device BT functionality is ON.
• Pairing of this unit and the source device is completed.
• Unit is in connected mode (pairing indicator (BT Link) of LED)
1. Press the STAND-BY/ON button to turn the power on.
2. Press the MODE button to select BT function.
3. Start the BT connection from the BT stereo audio source device.
4. Press play button (on main unit, remote control or source device).
NOTE:
If the source device has an extra bass function or equalizer function, set them to off. If these functions
are on, sound may be distorted.
20