Connecting The Phone To The Wi-Fi Network Created By The Projector - Philips PicoPix PPX5110 User Manual

7 Connecting the phone to the Wi-Fi
network created by the projector
Enter the IP address 192.168.49.1 in the browser
address of your smartphone to set up the wire-
less environment. This will enable smartphone
internet browsing with wireless projection.
1 Switch to iOS mode by pressing the
B button for one second.
2 Connect the phone to the hotspot created by
the projector.
Notice
This function depends on type and
model of your phone.
3 Enter 192.168.49.1 in your favourite browser.
4 Select Wi-Fi AP Setting.

Connecting the phone to the Wi-Fi network created by the projector

5 Select Scan.
6 Select your wireless network.
13