Smeg 60 Series User Manual page 13

How to set the Fridge function
How to set the Low Temp function
How to revert to the Freezer function
How to reset default settings
ATTENTION: If the default settings are restored, it is
necessary to reactivate the choice of operation of
the MultiZone compartment in case it was previously
set as Fridge or Fresco.
How to activate the date
How to deactivate the date
Select the Menu button
to select
MultiZone Options The freezer compartment can, if required, be converted to the refrig-
eration o Low Temp operating mode.
Settings
Fridge
Settings
Fresco
Settings
Freezer
Default Setting This offers the possibility to reset default factory settings and cancels
any previous changes.
Settings
Enter to confirm
Date
Set Date The display will visualize the date in the format dd:mm:yy (day:month:year),
the day will blink. Use the Up/Down buttons
firm with Enter
the date will be set.
How to set the date
Settings
Show Date Using this function it is possible to deactivate/activate the date visuali-
zation on the display.
Settings
Settings
Settings and Special Functions
Basic settings of the Menu
and used the Up/Down button
.
Multizone Options
Enter to confirm
Multizone Options
Enter to confirm
Multizone Options
Enter to confirm
Default Setting
to go on to the next setting; once the year is confirmed
Date
DATE: 01-01-2009
Date
DATE: 01-01-2009 On
Date
DATE: 01-01-2009 Off
5
5.3
to modify the setting, con-
Set Date
Show Date
Show Date
11