Smart zoom does not function.
Set [Digital Zoom] to [Smart] (page 49).
•
•
This function cannot be used when:
The image size is set to [8M] or [3:2].
–
Shooting in Multi Burst mode.
–
Shooting movies.
–
The flash does not work.
The flash is set to
•
You cannot use the flash when:
•
[Mode] (REC Mode) is set to [Burst] or [Multi Burst] (page 38).
–
(High sensitivity mode) or
–
When the mode dial is set to
–
Set the flash to
•
selected in the Scene Selection.
Fuzzy specks appear in images shot using the flash.
Dust in the air reflected the flash light and appeared in the image. This is not a malfunction.
•
The close-up (Macro) function does not work.
(Twilight mode) or
•
The date and time are not displayed.
While shooting, the date and time are not displayed. Only during playback, the date and time
•
are displayed.
The date and time are recorded incorrectly.
Set the correct date and time (
•
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 30,
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 36) or adjust the exposure (page 30,
When the brightness of the screen is too low, adjust the brightness of the LCD backlight
•
(page 24,
step5 in "Read This First").
t
•
Turn on the screen (page 24).
(Flash forced off) (
t
(Twilight mode) is selected in the Scene Selection.
.
(Flash forced on) when
(Landscape mode) is selected in the Scene Selection (page 30).
step 2 in "Read This First").
t
step 5 in "Read This First").
(Landscape mode) or
step5 in "Read This First" ).
t
step5 in "Read This First").
t
(Beach mode) is
85