Scene Selection - Sony Cyber-shot DSC-W100 User's Manual / Troubleshooting

Scene Selection

For details step 5 in "Read This First"
t
For shooting an image appropriately according to the scene condition, a combination of
functions is determined by the camera.
Macro
—
—
To adjust the exposure manually
1 Press z on the control button when the mode dial is set to M.
The "Set" indicator at the lower left of the screen changes to "Return," and the camera enters the
manual exposure setup mode.
2 Adjust the settings using the control button.
b/B: Aperture (F value)
v/V: Shutter speed
VGA
M
Return
SAF 250
Shutter Speed
When the zoom is set fully to the W side, you can select an aperture, F2.8 or F5.6.
When the zoom is set fully to the T side, you can select an aperture, F5.2 or F10.
You can select a shutter speed from 1/1000 to 30 seconds.
The difference between the settings and proper exposure judged by the camera appears as an EV
value on the screen. 0EV indicates the value judged as the most suitable by the camera.
3 Shoot the image.
• To use the close-up (Macro), or self-timer function, or to change the flash mode, press z to cancel the
manual exposure setup mode after step 1. (The "Return" indicator changes to "Set".)
• The flash is set to
• Shutter speeds of one second or longer are indicated by ["], for example, 1".
• When you set the shutter speed slower, using a tripod is recommended to prevent the effects of vibration.
30
AF range
Flash
finder
SL
/
/
FINE
98
"Return"
Aperture value
EV value
F2.8 0
EV
(Flash forced on) or
( : you can select the desired setting)
White
Focus preset
Balance
Auto/ WB
(Flash forced off).
Burst/
Flash level
Multi Burst
—
— —
—