Troubleshooting
The date and time are not displayed on the LCD panel.
While shooting, the date and time are not displayed. They are displayed only during playback.
•
The recording date is not superimposed on an image.
This camera does not have a feature for superimposing dates on images (page 107).
•
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 31).
•
The screen is too dark or too bright.
Adjust the brightness of the LCD backlight (pages 17, 67).
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 43) or adjust the exposure (page 31).
The image is too bright.
Adjust the exposure (page 31).
•
The image colors are not correct.
Set [COLOR] (Color Mode) to [Normal] (page 42).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring. This phenomenon is not a malfunction.
•
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] in the
•
Shoot the subject at a distance closer than the flash range using the flash.
•
Light the room and shoot the subject.
•
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded (page 2).
•
(Setup) menu to [On] (page 60).
101