Setup 4; Calibration - Sony DSC-T50 Cyber-shot&reg Handbook

Setup 4

For details on the operation 1 page 58
4

Calibration

Enables you to perform calibration when the touch panel buttons do not react at the
appropriate points where you touch.
Using the paint pen, touch the × mark displayed on the screen.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.
1/3
Calibration
Touch the "X"
Cancel
The × mark moves on the screen.
If you fail to press the right spot, the calibration is not performed. Press the × mark again.
70