Troubleshooting
Cannot print the image at the size selected.
Disconnect the cable for multi-use terminal and reconnect it whenever you change the paper
•
size after the printer has been connected to the camera.
The print setting of the camera differs from that of the printer. Change the setting of either the
•
camera (page 94) or the printer.
Cannot operate the camera after canceling printing.
Wait for a while as the printer is carrying out the cancellation. It may take some time
•
depending on the printer.
Touch panel
The touch panel buttons do not appear.
Press
•
Cannot operate the touch panel buttons correctly or fully.
Perform [Calibration] (page 70).
•
The paint pen operation reacts at inappropriate points.
Perform [Calibration] (page 70).
•
Others
The lens gets fogged.
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
•
using it.
The camera becomes warm when you use it for a long time.
This is not a malfunction.
•
The Clock Set screen appears when you turn on the camera.
Set the date and time again (page 69).
•
You want to change the date or time.
Set the date and time again (page 69).
•
108
(on-screen key).