Canon TS8200 Series Online Manual page 210

• You cannot use a hyphen for the initial or last character of the printer name.
• TCP/IP settings
Performs IPv4 or IPv6 setting.
• WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows).
◦ Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows.
◦ Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
◦ WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD. To transfer
the scanned data, tap Color.
Note
• When you forward the scanned data to the computer searched using WSD, you cannot select
the document type.
◦ Timeout setting
Specifies the timeout length.
• Bonjour settings
Setting items for LAN using Bonjour for macOS.
◦ Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
◦ Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
• LPR protocol setting
Enables/disables the LPR setting.
• RAW protocol
Enables/disables RAW printing.
• LLMNR
210