Start/Resume Button - Kodak A3 User Manual

Start/Resume button

A-61793 November 2017
7. Press the power button on the flatbed. If the flatbed is being
connected for the first time, wait for the PC to find and install the
device drivers for the flatbed.
When the Start/Resume button is green and steady, the flatbed is
ready to use.
NOTE: If you need to remove the cable from the scanner or flatbed,
turn off the scanner or the flatbed, then release the cable from
its position.
You can scan a document using the Start/Resume button on the
flatbed.
When you press the Start/Resume button on the flatbed,
you will get the same result as pressing the Start/Resume
button on the scanner. The application that is associated
with the number displayed in the operator control panel on
the scanner is launched. By default, the displayed
numbers are associated with Smart Touch. The displayed
numbers 1-9 are mapped to Smart Touch task shortcuts
1-9.
If you are scanning several exception documents using the flatbed, it
may be easier to use the Start/Resume button on the flatbed to start
scanning.
Indicator status:
• Steady green: flatbed is on, ready to scan, or scanning.
• Steady red: USB cable is not connected, has lost USB
communication with host PC after power up or there is a flatbed
failure or error.
• Flashing green: waiting/Power Saver mode.
Power button
Start/Resume button
3