Cleaning the flatbed
6
The flatbed's glass platen can collect fingerprints and dust. Use
Brillianize Detailer Wipes for Kodak Scanners (CAT No. 826 6488) to
clean the glass platen.
1. Open the flatbed cover.
2. Wipe the glass platen with a "Step 1" Brillianize Detailer wipe.
3. Wipe the glass platen again using the "Step 2" Brillianize Detailer
wipe to remove any debris and polish the surface.
4. Close the flatbed cover.
IMPORTANT: Do not spray or pour cleaning liquids on the flatbed's
glass platen, as these liquids may seep under the glass
and cause damage.
A-61793 November 2017