Locking the flatbed
Connecting the
flatbed
2
To prevent damage to internal components when relocating the flatbed
do the following:
1. If your scanning application provides a "Ship Scanner" option,
enable this option before locking the flatbed. Enabling this option
will ensure proper locking.
If your scanning application does not provide a "Ship Scanner"
option, scan one document on the flatbed before proceeding to
Step 2.
2. Power down the scanner and carefully lift the flatbed up and slide
the Lock/Unlock lever to the Lock position.
1. Power down the scanner.
2. If you have not already installed the flatbed software, install it before
connecting the flatbed.
3. Select the appropriate power cord for your region from the supply of
plug cords packed with your flatbed.
4. Connect the power supply, power cord and USB cable to the
flatbed. Refer to the illustration below for making proper
connections.
5. Connect the other end of the USB cable to an open USB port on
your PC.
NOTE: If you have a Scan Station 700 Series or S2000 Series
scanner, connect the other end of the USB cable to the
scanner.
6. Turn on the scanner.
A-61793 November 2017