Self-Diagnosis Display - Sony DSC-T3/T33 Operating Instructions Manual

Self-diagnosis display

– If a code starting with an alphabet
letter appears
Your camera has a self-diagnosis display.
This function displays the camera
condition on the LCD screen with a
combination of a letter and four numerical
digits. If this occurs, check the following
code chart and attempt the corresponding
corrective actions. The last two digits
(indicated by ) will differ depending
on the state of the camera.
C:32:ss
Self-diagnosis display
118
Code Cause
C:32:  There is trouble with your
camera's hardware.
The camera cannot read or write
C:13: 
data on the "Memory Stick
Duo".
An unformatted "Memory Stick
Duo" is inserted.
The inserted "Memory Stick
Duo" cannot be used with your
camera, or the data is damaged.
A camera malfunction that you
E:61: 
cannot reverse has occurred.
E:91: 
If you are unable to solve the problem even after trying the corrective actions a few times,
contact your Sony dealer or local authorized Sony service facility.
Countermeasure
• Turn the power off and on again (page
20).
• Re-insert the "Memory Stick Duo"
several times.
• Format the "Memory Stick Duo" (page
51).
• Insert a new "Memory Stick Duo" (page
24).
• Press the RESET button located on the
lower right side of the control button,
then turn the power on again. (page 105)