Setting The Date And Time - Sony DSC-T3/T33 Operating Instructions Manual

Setting the date and time

Mode switch
1
 Set the mode switch to
• To change the date and time on the
Setup screen, select [Clock Set] in
(Setup 2) (pages 54 and 126), and
2
perform the procedure from step
• You can also carry out this operation when the
mode switch is set to or .
POWER button
2
.
 Press POWER to turn on the
power.
The POWER lamp (green) lights up and
the Clock Set screen appears on the LCD

.
screen.
Clock Set
Y/M/D
M/D/Y
D/M/Y
2004 / 1 / 1 12 : 00
OK
AM
Cancel
Clock Set
2004 / 1 / 1 12
3
 Select the desired date display
format with / on the control
button, then press .
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable battery (page 128), which
provides the power for saving the time data,
ever becomes low, the Clock Set screen will
appear again. When this happens, reset the date
and time, by starting from step  above.
Y/M/D
M/D/Y
D/M/Y
: 00 OK
AM
Cancel
21