Cutting Movies; Deleting Unnecessary Portions Of Movies - Sony Cyber-shot DSC-T1 Operating Instructions Manual

Cutting movies

a Set the mode switch to
b Select the movie you want to
cut with b/B.
c Press MENU.
The menu appears.
d Select
(Divide) with B, then
press z. Next, select [OK] with
v, then press z.
The playback of the movie starts.
e Decide on a cutting point.
Press z at the desired cutting point.
60min STD
6
4 0
10/10
101
Divide
00:00:02
Dividing
Point
O K
Cancel
Exit
When you want to adjust the cutting
point, use [c/C] (frame forward/
rewind) and adjust the cutting point
using b/B. If you want to change the
cutting point, select [Cancel]. The
playback of the movie starts again.
f When you have decided on a
cutting point, select [OK] with
v/V, and press z.
74
g Select [OK] with v, then press
z.
.
The movie is cut.
To cancel cutting
Select [Exit] in step 5 or 7. The movie
appears on the LCD screen again.
• You cannot cut the following images.
– Still images
– Movie files not long enough to cut
– Protected movie files
• You cannot restore files once you cut them.
• The original movie is deleted when you cut it.
• The cut movies are recorded as the newest files
in the selected recording folder.
Deleting unnecessary
portions of movies
a Cut an unnecessary portion of
a movie (page 74).
b Display the portion of the
movie you want to delete.
c Press
(Delete).
The movie has not yet been deleted at
this point.
d Select [Delete] with v, then
press z.
The movie currently displayed on the
LCD screen is deleted.
• Note that you cannot restore deleted portions of
movies.