Redback A 4432 Operating Manual page 16

Redback® A 4432 4+4 Channel Mixer
10.6 Editing The A 4433 Audio Input Button Labels
The Audio Input Button labels are stored on the Micro SD card located in the side of the A 4433 wall plate. In order to edit
the audio input labels the MIcro SD card needs to be removed and then connected to a PC or Laptop. To remove, disconnect
power from the A 4432 and then Push to eject the Micro SD card.
Once removed the Micro SD card will need to be connected to a PC. You will need a PC or laptop equipped with a Micro
SD card reader to do this. If a Micro SD slot is not available then the Altronics D 0371A USB Memory Card Reader or similar
would be suitable (not supplied).
Make sure the PC is on and card reader connected and correctly installed. Then insert the Micro SD card into the reader.
Go to "My Computer" or "This PC" and open the SD card which is usually marked "Removable disk".
In this case it is named "Removable disk (O:) as shown in figure 13.
Open the Removable Disk and you should get a window that looks like figure 14.
16 Redback® Proudly Made In Australia
Fig 13
Fig 14
www.altronics.com.au