Redback A 4432 Operating Manual page 13

10.4 A 4433 Screen Layout Guide
Fig 11 shows the layout of the A 4433 LCD.
1 Input selection buttons 1-4
Use these buttons to select the desired input
source.
2 Local Input Button
Press this button to activate the local input.
If an A 4931 local input wall plate or A 4932
local input box is connected to the A 4433
wall plate then any audio from this plate
will override the zone input. The button will
change to red when active.
3 Local input volume up button
Press this button to increase the local input
volume.
4 Local input volume bar graph indicator
This bar provides a quick visual indicator of
the local input volume.
5 Local input volume down button
Press this button to decrease the local input
volume.
6 Sound indicator button
Press this button to mute/enable the sound.
The button will change to red when the
output is muted.
7 Menu button
Use this button to enter the Menu functions.
The menu screen is explained in section 10.5.
8 Zone volume down button
Press this button to decrease the zone volume.
9 Zone volume bar graph indicator
This bar provides a quick visual indicator of the zone volume.
10 Zone volume up button
Press this button to increase the zone volume.
11 Clock display
This time and day display is local to this plate only and is set by accessing the "menu/change time" option (refer
to section 7.0 for more details). This time needs to be set for each plate by the user and has no correlation to the
A 4432 which has no time facility.
The time is backed up by the supplied CR2032 battery which needs to be inserted into the battery holder as
shown in figure 1. Note the battery will backup the time for months only. Remove the battery if power is to be
removed for long periods of time.
www.altronics.com.au
Redback® A 4432 4+4 Channel Mixer
INPUT 1
INPUT 3
ZONE
10
VOL
UP
ZONE
9
VOL
DOWN
11
00:00:00 Mon
INPUT 1
INPUT 2
INPUT 2
INPUT 3 INPUT 4
INPUT 4
LOCAL INPUT
LOCAL
MUTE
VOL
OFF
UP
LOCAL
MENU
VOL
DOWN
7 5
8 6
Fig 11
Redback® Proudly Made In Australia 13
1
2
3
4