Farr HD8625 Technical Manual page 126

and axial loading.
Available in single or two speed.
hD8625 8- Eight displacements ranging from " 35K T
5
/
8
3 3
6 in to 15 in .
Envelope dimensions remain the
same regardless of displacement.
HYDRAULICS, INC.
HYDRAULICS, INC.
Starting and stall torques equal
to 90-94% theoretical torque.
Speed to 2,000 RPM continuous. HYDRAULICS, INC.
HYDRAULICS, INC.
Features of the 15 Series Standard Motor:
Standard Motor - 3000 PSI (Code 61)
Features of the 15 Series Standard Motor:
Standard Motor - 3000 PSI (Code 61)
Eight fixed displacement motors
ranging from 6 in
Eight fixed displacement motors
Starting and stall torques equal
ranging from 6 in
to 90-94% of theoretical torque.
Starting and stall torques equal
to 90-94% of theoretical torque.
Speed to 2,000 RPM continuous.
Speed to 2,000 RPM continuous.
Up to 75 HP continuous.
Up to 75 HP continuous.
Conforms to SAE 'C' mounting
Conforms to SAE 'C' mounting
specification.
specification.
Weighs 43 lbs.
Weighs 43 lbs.
15 Series Retractable
Shaft easily retracted from driven
mechanism while allowing full torque
through SAE C mount.
Manual rear knob for fast, easy
disengagement.
Spring loaded shaft engages easily
back into mechanism.
Shaft held in retracted position by user
supplied spacer between knob and rear
housing.
Made in USA
Made in USA
T M
7.2 echnical anual
ong
POWER to be the Best!
R
POWER to be the Best!
R
Weight = 51 lbs.
to 15 in .
3 3
to 15 in .
3 3
CROSS SECTION
CROSS SECTION
MOTOR SELECTION GUIDE
MOTOR SELECTION GUIDE
15 Series Two Speed
All available displacements of
standard motor.
Spool valve shift from full to
partial displacement.
Standard shift ratio is 2:1 - Some
special ratios available.
Shift on the run.
Typical applications - winch, track
and wheel drives.
Weight = 61 lbs.
PUBLICATION DS151005 8/03
PUBLICATION DS151005 8/03
h c
yDraulic oMponenTs