Philips Pro Plus 32HFL5332/93 Service Manual page 13

4.3.7 IR/LED Board
1. Remove the fixation screw.
2. Take the board out from the bezel and unplug the
connector from the IR/LED board.
When defective, replace the whole unit.
4.3.8 Keyboard Control Panel
1. Unplug the connector on the keyboard control panel.
2. Take the keyboard control panel from the bezel.
When defective, replace the whole unit.
4.3.9 LCD Panel
1. Remove the SSB as described earlier.
2. Remove the bathroom speaker board as described earlier.
3. Remove the PSU as described earlier.
4. Remove the stand as described earlier.
5. Remove the speaker as described earlier.
6. Release the control board cable from its clamps and
unplug the control board cable from the control board.
7. Remove the fixation screws that secure the LCD panel with
the metal bracket.
8. Lift the LCD Panel from the bezel.
When defective, replace the whole unit.
Mechanical Instructions
4.4 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
• While re-assembling, make sure that all cables are placed
and connected in their original position.
See Figure
• Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
TPN1.1HA LA 4.
4-1, Figure 4-2 and Figure 4-3.
EN 13
2010-Aug-13