Table of Contents
Advertisement
EN 14
5.
TPN1.1HA LA
5. Service Modes, Error Codes, and Fault Finding
Index of this chapter:
5.1 Service Modes
5.2 Service Tools
5.3 TV Main Software Upgrading
5.4 Error Codes
5.5 Fault Finding and Repair Tips
5.1
Service Modes
The Customer Service Mode (CSM) is used for communication
between the call centre and the customer, while the Service
Alignment Mode (SAM) offers several features for the service
technician.
This chassis also offers the option of using ComPair, a
hardware interface between a computer and the TV chassis. It
offers the abilities of structured troubleshooting, error code
reading, and software version read-out for all chassis.
5.1.1
Customer Service Mode (CSM)
Purpose
The Customer Service Mode shows error codes and
information on the TV's operation settings.The call centre can
instruct the customer (by telephone) to enter CSM in order to
identify the status of the set.This helps the call centre to
diagnose problems and failures in the TV set before making a
service call.
The CSM is a read-only mode; therefore, modifications are not
possible in this mode.
How to Activate CSM
Key in the code "123654" via the standard RC transmitter.
Note: Activation of the CSM is only possible if there is no (user)
menu on the screen!
Figure 5-1 CSM Menu [1/3]
2010-Aug-13
Service Modes, Error Codes, and Fault Finding
19020_200_100727.eps
100727
Figure 5-2 CSM Menu [2/3]
Figure 5-3 CSM Menu [3/3]
How to Navigate
By means of the "CURSOR-DOWN/UP" knob (or the scroll
wheel) on the RC-transmitter, can be navigated through the
menus.
General
•
1.1 Set Type NVM read/write (max. 16 characters).
•
1.2 Production code NVM read/write (max. 16
characters).
•
1.3 Reserved Not applicable.
•
1.4 Option Code Store in NVM (set feature grouping as
option) panel code.
•
1.5 Codes Error code Layer 2. Store in NVM. 10 error
buffers: 000 = No problem, 011 = I
012 = tuner error, 013 = panel.
•
1.6 SSB 12NC NVM read/write (12 characters).
•
1.7 Display 12NC NVM read/write (12 characters).
•
1.8 PSU 12NC NVM read/write (12 characters).
•
2.1 Current Main SW Detects and displays software
version.
•
2.2 Reserved Not applicable.
•
2.3 Reserved Not applicable.
•
2.4 NVM-version Detects and displays software version.
•
3.1 Signal Quality/Present analog/digital signal strength.
•
3.2 TV lock Detects and displays.
•
3.3 HDCP key Detects and displays.
•
3.4 Reserved Not applicable.
•
3.5 Reserved Not applicable.
•
3.6 HDMI audio format input Per supported format e.g.
Dolby TrueHD, DTS-HD Master Audio, MPCM.
19020_201_100727.eps
100727
19020_202_100727.eps
100727
2
C bus error,
Advertisement
Table of Contents
