Ex-Data; Technical Data And Specifications - Ecom Ex-DT 12 Operating Instructions Manual

- The maximum permitted ambient temperatures
wmust be respected.
- It must be ensured that the unit is not taken into
zone 0.
4. 2 Special safety regulations
In order to avoid injury, it is advisable to fit the sup-
plied protective caps over the test probes when the
device is not in use or being stored.
4. 3 Use on electrical circuits
outside the ex-area
When operating/using the device on electrical cir-
cuits outside the ex-area, ensure that the permitted
maximum values are not exceeded (responsibility of
the user).

5. Ex-data

EC-type-examination
certificate no.:
Ex-marking:
Approved for Zones  and , device group II; explosi-
on group IIC; potentially explosive gases, vapours or
mist, temperature class T4.

6. Technical data and specifications

Ambient
temperature Ta:
Storage temperature:
Resistance:
Inductance test:
Capacitance test:
Diode test:
0
0
TÜV 03 ATEX 0
II  G Ex ia IIC T4
-0 ... +50°C
-0 ... +50°C
approx. 0Ω - 500kΩ
0mH – H
0,5µF – 000µF
 diode sections