1. Application
The Ex-DT is a multi-purpose testing device for
calculating resistances, capacities and inductance
for potentially explosive areas of Zones and in
accordance with directive 999/9/EC (ATEX 37).
Reading are indicated in the form of visual and acou-
stic signals.
2. Safety precautions
This Owner's Manual contains information and safety
regulations which must be followed to ensure safe
and reliable operation of the device under the descri-
bed conditions.
Failure to follow the information and instructions
contained in this manual can have dangerous conse-
quences or may contravene applicable legislation.
Please take the time to carefully read through the
owner's manual before you start using the device.
In case of any doubt (in form of translation or print-
ing errors) the German language operating instruc-
tions shall apply.
3. Errors and load restrictions
If there is any risk that the safety or integrity of the
device has been compromised, then the de-vice must
be taken out of operation immediately and removed
from the ex-area without delay. Action must be taken
to prevent the device from being accidentally taken
into operation again.
We recommend that the device should be sent to the
manufacturer to be examined.
8
8
Need help?
Do you have a question about the Ex-DT 12 and is the answer not in the manual?