Page 1
Reference Monitor Controllers RM-MC1L Monitor Controller, Single Stereo Input & Output With Light Control RM-MC4L Monitor Controller, 4 Stereo Inputs, 1 Output With Light Control RM-MC51L Monitor Controller, 5.1 Stereo Inputs & Outputs With Light Control RM-MCL Monitor Light Controller, 3 Button, TX-STANDBY-REH Manufacturers of audio &...
Page 2
Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. Sonifex Ltd shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.
Figures 1 Reference Monitor Controllers Introduction 2 RM-MC1L Monitor Controller Front Panel Controls & Indicators Fig 2-1: RM-MC1L Block Diagram Fig 2-2: RM-MC1L Monitor Controller, Single Stereo Input Power LED Light Control Buttons & Output With Light Control DIM Button...
‘the Contract’ means the quotation, these Conditions of Sale and any other document incorporated in a contract between the Company and the As standard, Sonifex products are supplied with a 1 year back to base Purchaser. warranty. In order to register the date of purchase and so that we can keep...
Warranty the defect has not arisen from a design made, furnished or At the request and expense of the Purchaser the Company will test specified by the Purchaser; the Goods to ascertain performance levels and provide a report of the results of that test. The report will be accurate at the time of the vii.
Repairs & Returns Fuse Rating Please contact Sonifex or your supplier if you have any problems with your The product is supplied with a single fuse in the live conducting path of the Sonifex product. Email technical.support@sonifex.co.uk for the repair/ mains power input.
All products manufactured by Sonifex Ltd have the WEEE directive label Connect the equipment in accordance with the connection details and placed on the case. Sonifex Ltd will be happy to give you information about before applying power to the unit, check that the machine has the correct local organisations that can reprocess the product when it reaches its “end...
Monitor Controller, Single Stereo Input units, for providing source selection, volume, & Output With Light Control DIM and CUT controls for external analogue monitors, together with light controls for the Sonifex SignalLED range of RM-MC4L Monitor Controller, 4 Stereo Inputs, studio signs, or similar.
0dB down to -86dB. A CUT control mutes the audio outputs when enabled, whilst a DIM control attenuates the audio output channels The RM-MC1L is a stereo unit with a single stereo balanced analogue input by a pre-set amount from -2dB to -23dB. All of the buttons on the front and output.
CUT Button Power LED Master Volume Control Fig 2-2: RM-MC1L Monitor Controller, Single Stereo Input & Output With Light Control Power LED control is currently inactive, simply press the Standby button. The button The power LED illuminates blue whilst power is present within the unit.
RM-MC1L Monitor Controller button has a latching action by default*; press to activate, press again to To change the current mode of the buttons, the unit should be powered up deactivate. When the DIM button is active it illuminates yellow. An ‘active whilst holding down the DIM and CUT buttons for 5 seconds.
Transmit (TX) and Rehearse (REH) controls that provide a decrease the DIM attenuation level and clockwise to increase it (altering direct control interface to the Sonifex SignalLED illuminated studio signs. the audio level by -2dB to -23dB).
RM-MC1L Monitor Controller Function Description Digital Ground TX Output Collector Collector of optically-isolated driver for TX REH Output Collector Collector of optically-isolated driver for REH REH Output Tally Open collector driver active when REH is active STANDBY Remote Input Active low input to trigger STANDBY...
3 RM-MC4L Monitor Controller The RM-MC4L has four stereo balanced analogue inputs with a single stereo DIM, light control functions, remote operation and adjustments as the balanced output. The RM-MC4L has the same master volume control, CUT, RM-MC1L unit. Input Left Select...
The currently selected input button illuminates green and the unit defaults to input 1 on power up. For details of the other RM-MC4L Monitor Controller front panel controls and indicators, please refer to the RM-MC1L description. Rear Panel Controls & Connectors XLR Audio Inputs...
5.1 surround system. Alternatively, the unit can be used as a global volume control for 6 analogue outputs. The RM-MC51L has the same master volume control, CUT, DIM and light control functions and adjustments as the RM-MC1L unit. 4-LFE 4-LFE 5-LS...
The RM-MC51L has six audio inputs via XLR-3 pin socket connectors with Pin 2: Phase following pin assignments: Pin 3: Non-phase Pin 1: Ground For details of the other RM-MC51L Monitor Controller rear panel controls Pin 2: Phase and connectors, please refer to the RM-MC1L description. Pin 3: Non-phase...
RM-MCL Monitor Controller 5 RM-MCL Monitor Controller The RM-MCL is a simple light controller for controlling a TX - STANDBY - REH light system in a production studio, as detailed in the RM-MC1L description. It has no audio inputs or outputs. Global...
RM-MCL Monitor Controller Rear Panel Controls & Connectors Remotes Mains Power Fig 5-3: Rear View of RM-MC1L Fuse For details of the RM-MCL Monitor Controller rear panel connectors, please refer to the RM-MC1L description.
Need help?
Do you have a question about the RM-MC1L and is the answer not in the manual?
Questions and answers