Operation Instructions; Changing Colors - Mynt3d Printing Pen User Manual

Operation Instructions

1. Connect the AC Adapter and USB Power Cable to a power
outlet. Insert the plug into the power socket.
2. Adjust temperature (if desired) and press the feed button and
release. Keep an eye on the temperature display and wait for
the pen to heat to temperature.
3. Straighten the end of the filament if necessary and insert it into
the filament loading hole until it stops. Press and hold, or double
click the feed button to load filament into the pen. Sliding the
speed control all the way up will make this process faster.
4. Start your drawing on a flat surface. Glass with a thin layer
of washable gluestick makes for an optimal work surface, but you
can use anything that is heat safe and your filament adheres to.

Changing Colors

1. Bring your 3D Pen up to temperature.
2. Press and hold the withdraw button until the filament is free.
3. Ensure the new filament is cut correctly and load into the pen.
CORRECT INCORRECT
3