Related Manuals for Mynt3d Basic
Summary of Contents for Mynt3d Basic
- Page 1 “basic” U S E R M A N U A L Please read through this user manual completely before use. www.mynt3d.com...
- Page 2 WARNING BURN HAZARD. The ceramic nozzle of this device can become extremely hot. DO NOT touch the tip or any melted plastic or you may be severely burned. DO NOT allow the tip near or in contact with flammable materials. Inform others in the area that the unit is hot and should be handled with care.
- Page 3 Verify you received all the components. 4. User Manual 1. 3D Printing Pen 5. 3D Pen Stand 2. USB Power Cable 3. (3) Rolls of ABS Filament Features and Controls DC Socket Filament Loading Hole Fast Medium Speed Indicator Slow Filament Type Indicator ABS/PLA Filament Unload Button...
- Page 4 Operation Instructions Note: requires AC-USB adapter or power bank with at least 2A (2000mA) output. Computer USB is not sufficient. 1. Connect the AC/DC adapter and USB Power Cable to a power outlet or power bank. Insert the plug into the power socket. 2.
- Page 5 Operation Instructions (contintued) 6. To adjust the speed, press the speed control button until you reach your desired speed. The three lights on the other side of the pen will show your selected speed. Slow Medium Fast 7. Start your drawing on a flat surface. Poly carbonate, paper, or glass with a thin layer of washable gluestick makes for an optimal work surface, but you can use anything that is heat safe and filament adheres to.
- Page 6 Then unscrew the end of the pen to check if there is a piece that can be removed. If it’s still clogged, send an email to support@mynt3d.com and we will try to assist or replace your pen if it’s still in the 1 year warranty.
- Page 7 RoHS Certifications: Limited 1 Year Warranty We stand by our products and offer a 1 year limited warranty that covers defects in manufacture. For more information visit: www.mynt3d.com/pages/warranty Contact information: MYNT3D 4041 Soquel Dr Ste A-148 Soquel, CA 95073 support@mynt3d.com...
Need help?
Do you have a question about the Basic and is the answer not in the manual?
Questions and answers