Gigabyte R281-T91 Service Manual page 63

Parameter
Save Options
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Default Options
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Description
Saves changes made and closes the BIOS setup.
Options available: Yes/No.
Discards changes made and exits the BIOS setup.
Options available: Yes/No.
Restarts the system after saving the changes made.
Options available: Yes/No.
Restarts the system without saving any changes.
Options available: Yes/No.
Saves changes made in the BIOS setup.
Options available: Yes/No.
Discards changes made and closes the BIOS setup.
Options available: Yes/No.
Loads the default settings for all BIOS setup parameters. Setup Defaults
are quite demanding in terms of resources consumption. If you are using
low-speed memory chips or other kinds of low-performance components
and you choose to load these settings, the system might not function
properly.
Options available: Yes/No.
Saves the changes made as the user default settings.
Options available: Yes/No.
Loads the user default settings for all BIOS setup parameters.
Options available: Yes/No.
Press [Enter] to configure the device as the boot-up drive.
- 63 - BIOS Setup