Removing And Installing A Memory Module; Dimm Population Table - Gigabyte R281-T91 Service Manual

3-3-2 Removing and Installing a Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
2

3-3-3 DIMM Population Table

Ranks Per
Type DIMM and
Data Width
RDIMM
RDIMM
RDIMM
Capacity
DIMM Density
4Gb
SRx4
NA
DRx8
8GB
16GB 32GB
DRx4
1
Speed (MT/s); Voltage (V)
Slot Per Channel (SPC)
DIMM
DIMM Per Channel (DPC)
1 Slot per
(GB)
Channel
1DPC
8Gb
1.2V
16GB
16GB
2666
- 25 -
2
2 Slots per
Channel
1DPC 2DPC
1.2V 1.2V
2666 2400
System Hardware Installation