Recording Images With The Flash - Sony Cyber-shot DSC-F55V Operating Instructions Manual

Recording images with the flash

The initial setting is auto (no indicator). In this mode, the flash automatically strobes
when the surroundings become dark. When you change the flash mode, press the
(flash) repeatedly so that the flash mode indicator appears on the LCD screen.
Each time you press the
(No indicator) t
Auto red-eye reduction: The flash strobes before recording to reduce the
Forced flash:
No flash:
You can change the brightness of the flash (FLASH LEVEL) in the menu settings
(page 31).
Notes
• The recommended shooting distance using the built-in flash is 0.3 m to 2.5 m.
(
•
Auto red-eye reduction) may not produce the desired red-eye reduction effects depending
on individual differences, the distance to the subject, if the subject does not see the pre-strobe,
or other conditions. In addition, red-eye reduction effects are also difficult to obtain if you set
the shutter to a slow speed in the PROGRAM AE shutter priority mode.
• The flash effect is not obtained easily when you use forced flash in a bright location.
16
Flash emitter
Flash lamp
(flash)
Photocell window for
flash
(flash), the indicator changes as follows.
t t t (No indicator)
red-eye phenomenon.
The flash strobes regardless of the surrounding
brightness.
The flash does not strobe.