Changing The Iso Sensitivity - Sony DKC-FP3 Operating Instructions Manual

Changing the ISO Sensitivity

You can the get the same effect with this mode as is achieved by using films with different ISO
sensitivities in film cameras. You can choose from ISO 50, 100 and 400.
3~5
3
•PC
•OFF
•CAM
•PLAY
1
When the WB indicator disappears, white balance
adjustment is complete.
The camera is ready to take pictures.
The white balance you have chosen is valid until
you readjust it.
Note
When the WB indicator flashes, the white
level was not successfully adjusted.
Press any other operation button to leave
this mode, then begin the white balance
adjustment process again.
4
1
While pressing the mode lock (green), turn the
power/mode dial to CAM mode.
2
Push the LCD button to turn on the LCD monitor.
Note
Settings can also be confirmed on the LCD panel.
When checking the settings on the LCD panel,
2
this step is not necessary.
3
Turn the mode dial to ISO and then press the shift
button.
The ISO MODE menu appears.
4
Rotate the shift dial while pressing the shift
button. Choose an ISO sensitivity.
CAM
ISO MODE
50
100
400
continued on next page
GB
59