Sony DKC-FP3 Operating Instructions Manual page 122

Sony dkc-fp3 digital still camera operating instructions
Table of Contents

Advertisement

Internal flash
White balance
Video output terminal
Accessory shoe
Remote control terminal
PC interface (IEEE1394) terminal
Power source
Power consumption
Operating temperature
Storage temperature
Dimensions
Mass
GB
122
External light sensor, self-adjusting system:
adjusts to all shutter speeds
Guide Number: GN10
Range: 1.0 to 2.5 meters approx. (ISO 100,
without EV compensation)
Flash modes: Auto/On/Off
Auto/One push hold/Indoor/Outdoor
NTSC model: 1.0Vp-p 75 , unbalanced, sync
negative
PAL model:
1.0Vp-p 75 , unbalanced, sync
negative
For use with external flash
For use with RM-S7D
400 Mbps, 6-pin, for connecting to a PC
Use with the "Info LITHIUM" battery NP-F550
(not supplied) or the AC power adaptor/charger
AC-VQ800.
For camera recording 0.9 A, DC7.2 V
(when the LCD monitor is ON)
For camera playback 0.6 A, DC7.2 V
(When the LCD monitor is ON)
When connected to the PC 0.95 A, DC7.2 V
(When the LCD monitor is ON)
0°C to +40°C (32°F to 104°F)
–20°C to +60°C (-4°F to 140°F)
130
100 150mm
(5 1/5
4 6 inches) (W
Approx. 900g (not including battery pack and
PC card)
H L)

Advertisement

Table of Contents
loading

Table of Contents