Ek-Mfr/2 Power Supply Solutions; Appendix E - Eurotek EK-MFR/2 User Manual

APPENDIX E

EK-MFR/2
POWER SUPPLY SOLUTIONS
IMPORTANT:
This device must always be connected to an external circuit breaker for AC and DC power supply
that must be actuated before operating on the device.
The breaker must always be installed in a position that is easily accessible.
The EK-MFR/2 can be equipped with different power supply configurations.
EK-PWS/11
EK-PWS/12
EK-PWS/13
EK-PWS/A
46
110 Vac  220 Vac / 18 Vdc  36 Vdc
110 Vac  220 Vac / 36 Vdc  72 Vdc
110 Vac  220 Vac
85 Vac  264 Vac
(see EK-PWS/x user's handbook)
(see EK-PWS/x user's handbook)
(see EK-PWS/x user's handbook)
(see EK-PWS/A user's handbook)
25/02/2016 Arch.5105 601-000147/MN Rev. Y
EK-MFR/2