Shooting still images/movies
The screen does not turn on even when the power is turned on.
Turn on the screen (page 23).
•
Your camera cannot record images.
Check the free capacity of the internal memory or "Memory Stick Duo" (page 24). If it is full,
•
do one of the following:
Delete unnecessary images (
–
Change the "Memory Stick Duo".
–
You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to
•
the LOCK position. Set the switch to the recording position (page 95).
You cannot record images while charging the flash.
•
When shooting a still image, set the mode dial to a position other than
•
Set the mode dial to
•
The image size is set to [640(Fine)] when recording movies. Do one of the following:
•
Set the image size to other than [640(Fine)].
–
Insert a "Memory Stick PRO Duo" (page 95).
–
The subject is not visible on the screen.
Your camera is set to the Playback mode. Press
•
6 in "Read This First").
Recording takes a long time.
The NR slow shutter function is activated (page 20). This is not a malfunction.
•
The image is out of focus.
The subject is too close. Record in the close-up (Macro) recording mode. Make sure to
•
position the lens farther away from the subject than the shortest shooting distance,
approximately 2 cm (13/16 inches) (W)/30 cm (11 7/8 inches) (T), when shooting. (
in "Read This First").
(Twilight mode) or
•
images.
The Focus preset function is selected. Select the auto focus mode (page 33).
•
Refer to "If the subject is out of focus" on page 34.
•
Optical zoom does not work.
You cannot change the zoom scale when shooting movies.
•
Precision digital zoom does not function.
Set [Digital Zoom] to [Precision] (page 47).
•
This function cannot be used while shooting movies.
•
82
step 6 in "Read This First").
t
when shooting movies.
(Landscape mode) is selected in the Scene mode when shooting still
.
to change to the recording mode (t step
step 5
t