Sony Cyber-shot DSC-W30 User Manual page 94

Enable printer to connect
[USB Connect] is set to [PictBridge],
•
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
The connection is not established.
•
Disconnect the cable for multi-use
terminal (DSC-W50) or the USB cable
(DSC-W30/W40), and connect it again.
If an error message is indicated on the
printer, refer to the operating
instructions supplied with the printer.
Connect to PictBridge device
You tried to print images before the
•
printer connection was established.
Connect to a PictBridge compliant
printer.
No printable image
You tried to execute [DPOF image]
•
without placing a DPOF (Print order)
mark on the image(s).
You tried to execute [All In This Folder]
•
while a folder that holds only movies
was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
Check the printer.
•
Printer error
Check the printer.
•
Check if the image you want to print is
•
corrupted.
94
The data transmission to the printer may
•
not be completed yet. Do not disconnect
the cable for multi-use terminal (DSC-
W50) or the USB cable (DSC-W30/
W40).
Processing
The printer is canceling the current print
•
job. You cannot print until it is finished.
This may take time, depending on the
printer.