Assembly Sketch - Gemtech MK-9K Operation And Maintenance

SOUND SUPPRESSOR MODEL MK-9K
modifications, improper mounting/installation, ordinary wear and tear, the
failure to follow manufacturer instructions and/or the use of inappropriate or
defective ammunition.
Gemtech shall have no liability for incidental or consequential
damages and under no circumstances will Gemtech be liable for
personal injury, property damage or economic loss.
This warranty and disclaimer is subject to all applicable laws some of
which may limit these terms.
WARRANTY REPAIRS: Return of a Damaged Suppressor
If a suppressor is damaged due to a manufacturing defect once it has been
fired, it may be returned to Gemtech for repair or replacement. Determination to
repair or replace is made solely at our discretion and only after we have had the
opportunity to examine and determine that the cause of the damage is due to a
manufacturing defect. It is the responsibility of the customer to cover shipping
costs and insurance to return the suppressor to Gemtech for inspection or repair.
Gemtech will pay any reasonable shipping and insurance costs to return the unit
to you.
To assure proper legal procedures for any repair returns, fill out and provide a
copy of the General Service Form with any packages sent to us. (Visit gem-
tech.com, navigate to Customer Support/Return and Repair Policies to download
the fillable General Service Form.pdf or call 208.939.7222)
BATFE no longer requires transfer on a Form 5 to the manufacturer for repair.
BATFE does require a letter accompanying the suppressor detailing the repairs
or modifications required (satisfied by a completely filled out General Service
Form). BATFE also requires proof of ownership satisfied by a photocopy of the
front of the owner's Form 3, 4, or 5.
NOTE: BATFE prohibits transferring the serial number to a new outer tube in
the case of damage to the tube. Tube damage rendering the suppressor unsafe
will require a new suppressor.
P. 11