Installing The Dealer Programming Software - Motorola GM1200E Installation Manual

3.0

Installing the Dealer Programming Software

To install the DPS into Microsoft Windows 3.1™
1.
Switch on the PC and then insert the Windows 3.1 DPS disk into A: drive.
2.
At the DOS prompt type WIN <return>.
3.
On entering the Windows 3.1 environment, from the Program Manager, open the FILE menu and select
RUN.
4.
Type a:\setup and select OK.
5.
Internal system checks are performed before installation begins to locate previous versions. If a previous
version is located it will be used as the default destination. This destination can only be changed once
on installation and will overwrite previous versions if located at that destination.
6.
At the DPS Installation prompts enter the required details,
- Destination
- ComPort 1-4?
- Language
- User Name
- Company Name
- Program Group for DPS icon
- Do you wish to install Y/N?
7.
The installer program checks whether a DPS variant is already at the chosen destination, otherwise
installation will not be permitted. The installer program will however, allow the same variant to be
overwritten when upgrading the DPS to the current version.
8.
After all of the prompts have been answered, the DPS will be installed as specified.
9.
To run the DPS double click on the DPS icon, in the DPS group folder or:
If selection is made via the menus, from the FILE menu select RUN and then BROWSE on the C: drive
to find the WGM1200E.EXE file and then select OK.
To install the DPS into Microsoft Windows 95™ or Windows NT™
1.
Switch on the PC and then insert the Windows 95™ or NT™ DPS disk into A: drive.
2.
On entering the Windows 95/NT environment, from the Taskbar select the START menu and select
RUN.
3.
Follow steps 4-8 above.
4.
To run the DPS , from the Taskbar select the START menu and via the Program menu select the
GM1200E DPS or:
If selection is made via the menus, from the Explorer menu select FILE, then select RUN and then
BROWSE on the C: drive to find the GM1200E DPS file and then select OK.
DPS Installation
Installing the Dealer Programming Software
1-3