Scanning Plu; Summary; Preparation - Casio SE-S3000 Dealer's Manual

Scanning PLU

Summary

You can easily register items with barcode label by using barcode scanner.
Without programming any PLU code, unit price nor linked department, you can register the items and
create the PLU programming data automatically by not found PLU registration.
You can input the PLU code by scanning the code or enter the PLU code and press ® manually.
The barcode system of this register is as follows:
Scanning PLU code
EAN-13 (PLU type)
EAN-8 (PLU type)
UPC-A (PLU type)
UPC-E (PLU type)

Preparation

Just connect the handheld scanner (option) with the register.
1. Power off the register, and disconnect the AC plug from AC outlet.
2. Remove the connector cover.
3. Connect the scanner to the register and tighten two screws of the connector.
4. Replace the connector cover, reconnect the AC plug and power on the register.
6
Input method
Scanner PLU code manual input
√ 13 digits with check digit
√ 8 digits with check digit
√ 10/11 digits without check digit
√ 6 digits without check digit
COM2(+5V)
Connect here
COM1(+5V)
Sample barcode