To Make A Series Of Personalized Settings - Zte MZ16 User Manual

Usb wireless network modem
Table of Contents

Advertisement

ZTE MZ16 USB EDGE MODEM User's Guide

6.5 To make a series of personalized settings

Click the "Setting" button
series of personalized settings including "SMS", "PIN", "Connection", "Dial Set", "Ring Set",
"Eons Set", "Network", options.
"SMS": to set SMS center number, SMS valid period, SMS status report and
system-auto-start switch. If you mark the "Auto Start" option with a tick, when you restart
your computer next time, the
"PIN": to lock or unlock the SIM card with the correct PIN code.
Note: If you lock the SIM card, then every time you use the ZTE MZ16 Manager, you
must enter the PIN code so as to unlock the SIM card. If you successively enter your PIN
code three times incorrectly, your SIM card will be locked. At this time you need the PUK
number to unlock the SIM card. The PIN and PUK codes may have been provided to you
together with the SIM card. If you do not have it, please contact your network provider.
The default PIN code is usually 1234.
"Connection": to set the default Dial-up attributes on EDGE and CSD.
"Dial Set": to make the default connection settings on EDGE and CSD. The option
"Show Average Rate", if active, shows the average speed in byte of sent and received
data.
"Ring Set": to set the incoming call and SMS rings (if your ZTE MZ16 supports this
feature).
"Eons Set": to redefine a personalized network name for your network provider. You
may add a personalized network name to the "EONS" list or delete it from the list. To add
a personalized network name to the "EONS" list, enter the default network name for your
network provider in the "Network" edit box and a personalized network name in the
"name" edit box, and then click the "add" button. To delete a personalized network name
from the "EONS" list, select it in the list and then click the "delete" button. If you want to
make one of its personalized network names effective, you must delete all personalized
network names in front of it in the "EONS" list. To display the default network name for
your network provider after having made one of its personalized network names effective,
you must delete all of its personalized network names in the "EONS" list.
"Network": to set band frequency of network and type of network search. That tri-Band
functionality is a network dependent feature. Check with your local operator to use this
functionality.
to pop up the "Option" dialog window. Here you may make a
Manager Software will start up automatically.
ZTE MZ16
12

Advertisement

Table of Contents
loading

Table of Contents