4.2 Safety switch-on valve
Setting the regulating screw @
a) Calculate flow
D = Flow rate through flow control valve
Full-flow !xessure
Full-flow pressures P"
0
2
4
6
b)Take note of the number of revolutrons of regulat-
ing @(flow control screw)
Flow rate through flow control valve
Note:
If the manual override 83 is set, it is automatically re-
set when the valve is actuated by a control srgnal.
5.1 Safety switch-on valve
The safety start-up valve 1s maintenance free.
When a muffler is used, contamination build-up
should be monitored, and the muffler replaced
when necessary.
0
2
10
12
4.2 Sicherheitseinschaltventil
Einstellung der Regulierschraube @
a) Durchflu5 ermitteln
D = DurchfluB der Drosselung
P d= Durchschaltdruck
4
10
12
b) Umdrehungszahl der Regulrerschraube($(Dros-
Die gedruckte Handhilfsbetatrgung @ fahrt berm
Ansteuern desventrls durch ein Steuersignal auto
matisch heraus.
5. Bedienung und Wartung
Verschmutzungsgrad kontrollteren. Bei
0
2
4
10
Bedarf
12