Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Heat Outdoors 902111
Summary of Contents for Heat Outdoors 902111
- Page 1 Shadow Diffusion Floor Lamp Patio Heater Safety Instructions and Operation Manual 902111 Heat Outdoors www.heat-outdoors.co.uk Unit 9, Stort Valley Industrial Estate 01279 466500 Stansted Road, Bishop’s Stortford info@heat-outdoors.co.uk Hertfordshire, United Kingdom CM23 2TU...
-
Page 2: Table Of Contents
Contents Brief Introduction . . . . . . . . . . . . . . . . . 3 Important Information . . . . . . . . . . . . . . . 3 Safety Instructions . -
Page 3: Brief Introduction
Brief Introduction Thank you for choosing our Shadow Diffusion Floor Lamp Patio Heater . This instruction manual will provide you with valuable information necessary for the proper care and maintenance of your new product . Please take a few moments to thoroughly read the instructions and familiarise yourself with all the operational aspects of your new heater . -
Page 4: Safety Instructions
Safety Instructions Read these instructions before using. WARNING Potential fire risk if the heater is covered by any material or positioned close to curtains or other flammable materials. • Only use the halogen heater on a firm solid horizontal area where all the feet on the base are in contact with the floor. - Page 5 • Don’t cover the unit with anything during operation or a short time after it’s shut down . • Don’t wrap the power supply cord on the unit . • The unit must be handled with care, and avoid vibration or sudden impact . •...
-
Page 6: Assembly Instructions
Assembly Instructions Connect 2 pcs of the middle tubing Place the cover through the bottom onto the heater by screwing together . tube . Then connect the heater by screwing them together . Assembly Instructions... - Page 7 Fix the heater on the base by 6pcs Swing the heater to the angle M6 *10mm screws with M6 spanner . you need, Then lock it with 2pcs M4*12mm screws . Pull the power cord gently out of the base as much as possible . Fix the power cord under the base using the supplied 2 pcs of M4*16mm screws .
- Page 8 Fix 2pcs fixing part on the base with 4pcs M6*10mm screws, then Fix the heater on the floor. Bore two holes in the floor, fix the heater by two expanding bolts on the floor. Complete! Assembly Instructions...
-
Page 9: Operation
Operation • Place the heater on a firm, level surface and plug into a grounded 230V 50Hz power outlet . Only operate the heater when it is in the upright position and the base is firmly secured to the floor. •... -
Page 10: Cleaning & Maintenance
Cleaning & maintenance Heater housing, grills and internal reflector • Disconnect the appliance from the power supply system . • After the appliance has cooled down, the housing can be wiped clean with a damp cloth . • Do not touch the bulb element with your fingers, since stains could build up from such a contact and may cause malfunction of the blub . -
Page 11: Storage
Storage If the heater will not be used for a long period of time, store it in a cool, dry location . To prevent dust and dirt build-up, use the original packaging to repack the heater . Technical Specification Ratings: 220-240V AC 50-60Hz Power consumption: 900/1200/2100W Height: 230CM Net weight: 18 .9 kg... - Page 12 Heat Outdoors Unit 9, Stort Valley Industrial Estate Stansted Road, Bishop’s Stortford Hertfordshire, United Kingdom CM23 2TU www.heat-outdoors.co.uk 01279 466500 info@heat-outdoors.co.uk...
Need help?
Do you have a question about the 902111 and is the answer not in the manual?
Questions and answers