To remove the memory card
Check that the access lamp is not lit, then
open the memory card cover.
CompactFlash/Microdrive: Push down
the CF card eject lever. After the card is
ejected a little, pull out the memory card.
"Memory Stick Duo": Push the "Memory
Stick Duo" once.
To shoot using a "Memory Stick Duo"
After turning on the camera, follow the steps below to switch the memory
card setting.
Press the Fn button so that the Quick
1
Navi screen appears (page 48).
Select the memory card item with v/V/
2
b/B on the multi-selector.
Select
with the front or rear
3
control dial.
• You can also select the card with
[Memory card] in the
(page 129).
24
Setup menu
CF card eject lever
Access lamp
Front control dial
Rear control dial