Setup Menu 1; Lcdbrightness; Transfer Mode; Video Output - Sony a (alpha) DSLR-A100 Operating Instructions Manual

Setup menu 1

Setup menu
The default settings are marked with

LCDbrightness

You can adjust the brightness of the LCD monitor.
1 Select [Enter] in [LCDbrightness].
2 Adjust the brightness with b/B on the controller or with the control dial, then press the center of
the controller.

Transfer mode

Selects the USB mode to be used when connecting the camera to a computer, etc., using a
USB cable.
Mass Storage
PTP

Video output

Sets the video signal output according to the TV color system of the connected video
equipment. Different countries and regions use different TV color systems. If you want to
view images on a TV screen, check page 79 for the TV color system of the country or region
where the camera is used.
NTSC
PAL
98
For details on the operation
.
Used for copying images to the computer. The camera is
recognized as a USB mass storage device.
Prints the images with a PictBridge compliant printer or
copies images to PTP (Picture Transfer Protocol) compliant
devices.
• For details on printing with a PictBridge compliant printer, see
page 123.
Sets the video output signal to NTSC mode (e.g., for the USA,
Japan).
Sets the video output signal to PAL mode (e.g., for Europe).
1
page 80