Glossary - Siemens Cerberus Dati Technical Manual

Cmx input output multiplexing system
Table of Contents

Advertisement

Central Processing Unit; the part of a computer containing the circuits required to interpret and execute the
instructions.
An electrical device composed by short metallic wire protected by a glass bulb. The wire melts when the current that
flows in it is higher than the fuse limiting value.
Light Emitting Diode; an electronic device that emits light when powered.
A type of network connection in which there two or more electronic devices (e.g. CMXs) on a single line.
A kind of output that is implemented using a transistor; this output type usually is able to supply a limited amount of
current.
A coupling device in which a light emitting diode (LED) energized by the input signals is optically coupled to a
photodetector such as a light sensitive output diode, transistor or silicon controlled rectifier.
A temporary switch used on CMX to reset the CPU and all the I/O ports.
A type of output that can drive high currents and voltages. Can be implemented on CMXs using the CMX-RB optional
device or connecting relays to the open collector outputs of a CMX-24O or CMX-16/8.
The interface used in communication between the gateway and the IC-2.
The interface used in communication between the IC-2 and the CMX connected to it.
The diodes to be paralleled to the relay coil to suppress the circuit-opening voltage spike. The CMX is equipped with
internal diodes.
E1110A.DOC

12 Glossary

CPU
Fuse
LED
Multidrop connection
Open collector
Optoisolator
Pushbutton
Relay output
RS-232
RS-485
Voltage suppression diodes
Data and design subject to change without notice. Supply subject to availability
© Copyright by CERBERUS AG, CH-8708 Männedorf, Switzerland 1995
GLOSSARY
01.96
47[51]

Advertisement

Table of Contents
loading

Table of Contents